David Clark Company Inc.

at 360 Franklin St, Worcester , 01604 United States

1. Manufacturing
2. Corporate Office
3. Radio & Communication Equipment

David Clark Company Inc., founded in 1935, manufactures only the highest quality headsets, Intercoms and communications solutions.

Description

David Clark Company, Inc. is an American manufacturer, best known for noise attenuating headsets with boom microphones. Located in Worcester, Massachusetts, the company was founded in 1935 by Mr. David M. Clark. It started in the textile business with the development of unique knitted materials for specialty undergarments and over time evolved to making aerospace and communications related products. David Clark Company (DCC) is housed in a four-story building containing approximately 215,000 square feet (20,000 m2) of working area. DCC designs and manufactures a wide variety of aerospace and industrial protective equipment, including pressure-space suit systems, anti-G suits, noise attenuating communication headset systems and several medical/safety products. DCC has been involved in the design and manufacture of air-space crew protective equipment since 1941, beginning with the design and development of the first standard anti-G suits and valves used by allied fighter pilots during World War II.[citation needed] DCC has designed and manufactured pressure/space suits. It developed partial pressure suits for NASA's Bell X-1 rocket-powered research aircraft in the 1940s, and full pressure suits for the D558-2 and North American X-15 research aircraft in the 1950s. DCC's X-15 suit design became the basis for all of its subsequent full pressure suits, including the space suits worn by astronauts for the first U.S. extravehicular activities (EVA) conducted during NASA's Project Gemini.[citation needed] Since 1946, David Clark's continuous pressure suit research and development efforts, sponsored largely by the Department of Defense to support its USAF high altitude aircraft (Lockheed U-2 and SR-71) programs, resulted in the late 1980s development of a new generation pressure suit. The result was the S1034 Pilot's Protective Assembly (PPA). The S1034 PPA has since become the USAF and DoD standard pressure suit and served as the basis for NASA's S1035 Advanced Crew Escape Suit (ACES).[citation needed] This was adopted for the Space Shuttle program, replacing DCC's (partial pressure) S1032 Launch Entry Suit (LES). Both the S1034 PPA and S1035 ACES continue to be used by the USAF and NASA. Throughout the 1990s, DCC conducted Engineering Design and Development activities for the USAF Advanced Technology Anti-G Suit (ATAGS) program. This included the design and analysis of advanced ATAGS/Combat Edge vest designs for F-22 Raptor. DCC designed and developed the Tactical Flyer's Ensemble (United States Patent 7,076,808). Research has also been conducted to develop the next generation of advanced pressure/space suit systems which will be required to satisfy emerging manned space exploration requirements. This included the development of the S1035-X ("D-suit") in the late 1990s and the follow-on Enhanced Mobility ACES circa 2005. In 2008, David Clark Company, along with its subsidiary, Air-Lock, Inc. of Milford, Connecticut, partnered with Houston, Texas based Oceaneering Space Systems to develop the Constellation Space Suit System (CSSS) for use on the upcoming Constellation program. In 2010 they designed, developed and fabricated pressure suits utilized on the Red Bull Stratos project, with which Felix Baumgartner performed a record-breaking free fall from a high-altitude balloon on 14 October 2012.

Company Rating

436 FB users likes David Clark Company Inc., set it to 3 position in Likes Rating for Worcester, Massachusetts in Small Business category

Summary

David Clark Company Inc. is Worcester based place and this enity listed in Manufacturing category. Located at 360 Franklin St MA 01604. Contact phone number of David Clark Company Inc.: (508) 751-5800