Columbus Bumps Car Audio

at Coming Soon, Columbus, 47201 United States

Our Products And Services

Columbus Bumps Car Audio
Coming Soon
Columbus , IN 47201
United States
Contact Phone
P: 8123748794


Columbus Bumps Has Arrived, Bringing You a Large Selection of New And !!USED!! Car Audio Equipment. We Advise, We Install, We !!BUY!! And Sell Equipment. You Hear It Bump Before We Sell It, We Hear It Bump Before We Buy It. We Build Custom Car Audio Configurations Tailored to Fit Your Vehicle, Your Budget, And Your Music. We Are a Mobile Business. We Will Come To You And Discuss One on One, What You Have, What You Want, And What Options We Can Offer You.

Opening time

  • Mondays: 17:00- 21:00
  • Tuesdays: 17:00- 21:00
  • Wednesdays: 17:00- 21:00
  • Thursdays: 17:00- 21:00
  • Fridays: 17:00- 21:00
  • Saturdays: 12:00- 21:00
  • Sundays: 12:00- 21:00

Company Rating

37 FB users likes Columbus Bumps Car Audio, set it to 90 position in Likes Rating for Columbus, Ohio in Shopping/retail category

Well, folks, Spring's coming, and we're about to start business again. Last year, most of the business we did was not inclusive of Facebook. So, we're building a website. I can't say too much now, because not only do we have a lot of good ideas to choose from, but our customers have made suggestions as well that we think are pretty bomb diggity. So, since that's gone so well up to this point, I'm giving everyone a chance to be heard. We are a used equipment trader. So many of you have expressed how nice it is to have somebody that you can come to not only for personal requests but for affordable solutions that give you the sound you want without absolutely pillaging your wallet. I'm sure a few places come to mind, right? Anyway... What do you want out of a trader? Or, in general, what would make our company work better for you? After all, you guys have made us what we are. You guys have molded this company so far. It's because of you that we got into custom mods and prototyping. From the first guy... erhem.. Bill.. that wanted a custom aluminum back plate for his S10 pickup. This ambitious enthusiast wanted to put 2 kilowatts RMS into his tiny-ass truck, but he didn't have any room for it. So in the end, we set him up with a custom fabricated aluminum back plate to replace the plastic bezel under his back glass. We water-jetted some aluminum, tapped some holes, bent some brackets, and he could fit 4 shallow mount P3's, a 1600 watt mono-block, a 600 watt speaker amp, a second battery, and a cap into his S10. Since then, we've done custom decks for brand new cars, old g-body muscle cars, some shit in between, custom top panels for jeeps, more back plates for trucks, and it all started with one guy, one request. And the first guy that ever came to me and said, "Dude, I want you to find me an oldschool fosgate power 1501bd." You know who you are, bro. We ended up finding him his beauty in sweet condition for almost half of what he was willing to spend on it. We could have charged you more, dude. And you would have paid it. But we're not in this to get rich off of one customer... like some places that come to mind... We're in it for a good reputation. Cause we understand that doing right by a bunch of folks will get us somewhere a lot faster than screwing everyone that wants to give us a chance... like some places we know... ok, I'm done making that reference, swear... So, anyway... You guys run this business. What do you want to see out of it? We'll take all your suggestions before Spring hits and business picks up strong. In the meantime, we're still taking requests and buying inventory. Hit us up. And stay warm, folks. Happy bumping. J

Published on 2013-02-02 17:30:14 GMT

We were away for a while... Becoming Experts at Speaker Repair and Custom Woofer In-House Builds. We now offer Subwoofer Re-Cones, Rebuilds, and Prototypes!! ---Like a Boss And We Have a Bunch of FI Audio and JL Audio Equipment on its Way. Let us Know Something if You Want any of That in Your Whip.

Published on 2014-04-16 19:10:04 GMT

News Update from CBumps! We're now offering custom boxes of every kind. Only catch is we're not using MDF or any form of particle board whatsoever. We're using a new CNC waterjet cutting machine to cut out our boxes to within .003 inch tolerances. They do exactly as we design them to do. But the water ruins particle board, so high end, hardwood or dense plywood boxes are our focus. We're able to do some amazing things with our software, 4th, 6th, and 8th order boxes included, and we never have to do over. Let us know if you're thinking about a custom solution, because the waterjet cuts it in 4 minutes. The only labor in it is design and assembly, and that cuts costs quite a bit compared to others offering custom enclosures. Thanks and Happy Bumping!

Published on 2013-07-06 22:22:45 GMT

Were about to prototype our own brand of power and ground distribution blocks. They will be made of pure stock oxygen free copper and will be no more expensive than the cheap junk you buy at the store. If you want to help us try them out, let us know.

Published on 2013-04-25 14:52:40 GMT

Okay, People... We're about to endeavor into our own brand of enclosures. These boxes will be set apart from other ordinary boxes by the fact that they have no inside corners. All corners are curved, especially in vents and ports. This will add to resonance, reflex, and cleanliness of sound with small improvements to SPL. We're pretty excited about it. Now if only we could figure out what to call them... We'll keep you updated.

Published on 2013-04-18 23:40:31 GMT

By Popular Demand, we will be doing more business in high end audio. A lot of people were happy last year about being able to find an affordable entry level system from us, but many more people were looking for higher end car audio that we didn't have in stock. So, we've got a line on some of JL's high end stuff and some more of Fosgate's oldschool legendary stuff. Fist come, first served, guys.

Published on 2013-03-25 15:46:07 GMT

We have a temporary, limited stock of BRAND NEW Rockford Fosgate P3 12's. The newest edition of P3's by Fosgate. They are dual 4 ohm P3D4-12's. 300-600 watt RMS range. These are going for about $140 online. Most offer free shipping, but then there's that damned wait for it to actually show up. We will match that. $140 per woofer, but we'll deliver to anywhere in Columbus same day, and anywhere within 20 miles of Columbus next day. Cash only. While supplies last. We've got boxes to add to your order for cheap. Some new, some used. You can even order a custom if you like, and we promise not to break the bank on any order. We have sealed singles and duals, vented singles and duals, and we can whip up a 4th or 6th order box in around a week, guaranteed impeccable tuning. We'll make boxes to fit if that's what your situation calls for. Lastly, I'll note that although we're still prototyping our own brand of box, trying to get the design just right, we will make to order the ever-so-intimidating "Isobaric Dual Reflex 6th Order Bandpass Enclosures." You have our number. JD