KUDU, A Schlumberger Company

at 9112-40th Street SE, Calgary, T2C 2P3 Canada

KUDU Industries Inc. is a leading manufacturer of complete Progressing Cavity Pump solutions.

KUDU, A Schlumberger Company
9112-40th Street SE
Calgary , AB T2C 2P3
Contact Phone
P: 1 403 279 5838


KUDU is a leading manufacturer and supplier of collaborative artificial lift solutions. It was founded in 1989 in Canada and has since then committed to quality, safety, performance, and technical excellence in its everyday operations. In May 2014, KUDU was acquired by Schlumberger and became part of its Lift Solutions.

Company Rating

31 Facebook users were in KUDU, A Schlumberger Company. It's a 15 position in Popularity Rating for companies in Company category in Calgary, Alberta

3455 FB users likes KUDU, A Schlumberger Company, set it to 11 position in Likes Rating for Calgary, Alberta in Company category

Generated summary (experimental)

The KUDU progressing cavity pump is a positive displacement pump with
a single helical rotor that rotates inside a
double internal helical elastomer-lined stator.
The stator is run into the well on the end of the production tubing while the rotor is
connected to a rodstring.
The PCP lifts fluid by transferring it from the intake at the bottom of the pump to the discharge at the top through a sequence of small,
discrete cavities that form as the rotor turns eccentrically within the stator.
The PCP delivers a constant flow, proportional to the size of the cavity and the rotational speed of the rotor.
A hydraulic or electric drive system at the surface rotates the rodstring, which causes the rotor to spin within the fixed stator, resulting in fluid production at surface.
Proprietary elastomers provide significant
improvements in bond strength, tear strength,
abrasion resistance, gas and water resistance,
and temperature ratings.
Various options are available in addition to the standard KUDU PCP to expand the range of applications.
Abrasion-resistant pump for oil recovery methods such as steam-assisted gravity drainage (SAGD), cyclic steam stimulation (CSS), steam drive, solvent, electric heating, and infill wells.
Submersible electrical motor and PCP system that eliminates the rodstring, enabling pump installation in a high-dogleg-severity (high-DLS) or horizontal section of the well and significantly increasing uptime, efficiency, and safety.
Advanced spray metal, corrosion- and abrasion-resistant coating applied to PCP rotors to increase rotor life and production efficiency.
Uniform elastomer thickness for even temperature distribution and uniform swelling, improving pump performance and making this technology suitable for light oil applications or wherever swelling is likely.
Automation solution that provides control and visibility of the PCP system in the well and maximizes production by improving uptime through pumping equipment protection.
VFDs for PCPs that lower energy consumption and operational costs, extend PCP run life, and enhance performance and safety.
A range of electric and hydraulic power units and driveheads for PCPs to maximize performance and safety.
Downhole equipment options to improve PCP run life and enhance well performance.
Request More Information